Removing The Rear Upper Cover - Canon Saddle Finisher-T2 Service Manual

Chapter 3
[1]
F-3-225
3.3.8.2 Removing the Rear
Upper Cover
1) Remove four screws [1] and remove the rear upper
cover [2].
[2]
[1]
[1]
F-3-226
3.3.8.3 Removing the Escape
Tray Cover
1) Remove four screws [1], open the escape door [2],
and then remove the escape tray cover [3].
3-56
[2]
0009-4090
0009-4431
[3]
[1]
F-3-227
3.3.8.4 Removing the Front
Inside Upper Cover
1) Remove four screws [1], open the escape door [2],
and then remove the front inside upper cover [3].
F-3-228
3.3.8.5 Removing the Grate-
shaped Upper Guide
1) Lower tray [1] below the grate-shaped upper guide
[2] (For how the tray is moved, see the steps under
"Removing the Tray 1.").
2) Remove five screws [3] and remove the grate-
shaped upper guide [2].
[1]
[2]
0009-4092
[2]
[3]
[1]
0009-4093