Removing The Front Inside Lower Cover; Removing The Stitcher Mount Unit; Positioning Plate Unit; Removing The Front Door - Canon Saddle Finisher-T2 Service Manual

Chapter 3
F-3-102
3.2.4.4 Removing the Front
Inside Lower Cover
1) Remove screw [1] and then remove the roller knob
[2].
2) Remove four screws [3] and remove the front inside
lower cover [4].
[3]
F-3-103
3.2.4.5 Removing the Stitcher
Mount Unit
1) Remove the E ring [1], shaft [2], and roller [3].
3-26
[2]
[3]
[1]
0009-4155
[3]
[1]
[2]
[4]
0009-4151
[3] [1]
F-3-104
2) Pull out the stitcher mount unit [1] to the front.
F-3-105

3.2.5 Positioning Plate Unit

3.2.5.1 Removing the Front
Door
1) Open the front door [1] and remove the clip [2].
2) Lift the front door [1] to remove.
[1]
F-3-106
[2]
[1]
0009-4453
[2]