Removing The Pcb Cover; Removing The Saddle Delivery Tray Unit - Canon Saddle Finisher-T2 Service Manual

Chapter 3
[1]
[2]
F-3-84
3.2.3.11 Removing the Saddle
Delivery Tray Unit
1) Lift the saddle delivery tray unit [1] open/close
lever [2] and open the saddle delivery tray unit.
[1]
F-3-85
2) Remove the door axis [1] in the direction of the
arrow and pull out the saddle delivery tray unit [2]
toward the front.
3-22
[1]
[1]
0009-3775
[2]
[1]
F-3-86
3) Remove the harness from two clamps [1].
4) Remove two connectors [2] and remove the saddle
delivery tray unit [3].
[2]
F-3-87
3.2.3.12 Removing the PCB
Cover
1) Remove seven screws [1] and remove the PCB
cover [2].
[2]
[1]
[3]
0009-3776