Punch Controller Pcb; Removing The Rear Cover; Removing The Punch Controller Pcb - Canon Puncher Unit-P1 Service Manual

Chapter 3
F-3-51

3.3.5 Punch Controller PCB

3.3.5.1 Removing the Rear
Cover
1) Remove three screws [1] and remove the rear cover
[2].
F-3-52
3.3.5.2 Removing the Punch
Controller PCB
1) Remove the two screws [1], disconnect seven
connectors [2], and remove the punch controller PCB
[3].
3-14
0003-6819
0003-6820
F-3-53