Drive System; Stapler; Removing The Front Door; Removing The Escape Tray Cover - Canon Saddle Finisher-T2 Service Manual

Finisher, sorter, deliverytray
Hide thumbs Also See for Saddle Finisher-T2:
Table of Contents

Advertisement

Chapter 3
 

3.2 Drive System

3.2.1 Stapler

3.2.1.1 Removing the Front
Door
1) Open the front door [1] and remove the clip [2].
2) Lift the front door [1] to remove.
[1]
F-3-34
3.2.1.2 Removing the Escape
Tray Cover
1) Remove four screws [1], open the escape door [2],
and then remove the escape tray cover [3].
[3]
[1]
F-3-35
3-10
0009-4449
[2]
0009-4414
[1]
[2]
3.2.1.3 Removing the Front
Inside Upper Cover
1) Remove four screws [1], open the escape door [2],
and then remove the front inside upper cover [3].
F-3-36

3.2.1.4 Removing the Stapler

1) Pull out the stapler, remove screw [1], and remove
the PCB cover [2].
F-3-37
2) Release the claw [1] and remove the PCB [2].
3) Disconnect three connectors [3].
4) Remove screw [4] and remove the stapler together
with the stapler base [5].
When removing, be careful not to damage the flag
0009-3634
[2]
[3]
[1]
0009-3631
[2]
[1]

Advertisement

Table of Contents
loading

Table of Contents