Canon Saddle Finisher-T2 Service Manual page 44

Chapter 2
5) The 1st and 2nd paper delivered to the processing tray are aligned and then delivered to the delivery tray.
<Escape Ejection (Destination: Escape Tray)>
When the escape tray is specified as the destination of paper ejection in the non-sort mode, the paper delivered from
the host machine to the finisher is rerouted to the path shown below by the escape inlet flapper and ejected to the
escape tray.
2-12
Stack ejection roller
1st delivery roller
Processing tray
F-2-14
Stack ejection roller
Rear end assist guide
F-2-15
Return roller
Return roller