Removing The Grate-Shaped Upper Guide; Removing The Tray 1 - Canon Saddle Finisher-T2 Service Manual

Chapter 3
[3]
[1]
F-3-142
3.3.2.4 Removing the Grate-
shaped Upper Guide
1) Lower tray [1] below the grate-shaped upper guide
[2] (For how the tray is moved, see the steps under

"Removing the Tray 1.").

2) Remove five screws [3] and remove the grate-
shaped upper guide [2].
[2]
[3]
[1]
F-3-143
3.3.2.5 Removing the Tray 1
When moving the tray down to attach it, you need
to push the tray lift motor gear [1] to the front (using
a screwdriver or the like) to release the clutch.
However, when the clutch is released, the tray [2]
drops by its own weight. Be sure to hold the tray
with your hand when releasing the clutch.
3-36
[1]
[2]
1) Remove the screw [1] and remove the stopper [2] at
0009-3612
the front.
[3]
2) Remove the screw [1] and remove the stopper [2] at
the back.
0009-3577
[1]
F-3-144
[2]
F-3-145
[1]
F-3-146
[2]
[1]
[2]