3) Remove two E rings [1] at the joint between the
swing unit and the return roller unit and then slide the
two return roller unit collars [2] inside.
4) Unhook the swing pressure rack [3] from the swing
unit center hook.
F-3-64
5) Remove the belt [1] from the gear [2], remove the
belt [3] from the gear [2] and gear [4], and pull out the
swing unit [5] from the delivery direction.
F-3-65
3.2.3 Saddle Unit
3.2.3.1 Removing the Front
Door
1) Open the front door [1] and remove the clip [2].
2) Lift the front door [1] to remove.
[1]
F-3-66
Chapter 3
0009-4451
[2]
3-17