Controlling The Phase Of The Crescent Roller - Canon Saddle Finisher-T2 Service Manual

Chapter 2

2.2.10 Controlling the Phase of the Crescent Roller

If alignment was executed with the crescent roller in contact with the stack of sheets, the resulting friction against
2-28
Alignment plate
Stack
Paper positioning plate
In case of 2 sheets:
Alignment plate home
position sensor (PI5)
Alignment motor (M5)
Paper positioning plate
motor (M4)
[1]: Move to wait position
[2]: Stapling period
[3]: Paper folding/delivery period
[4]: Move to following stack size wait position
F-2-36
Alignment motor
M5
Alignment plate
home position
sensor
F-2-37
Entry of Entry of 1st sheet of follow-
1st sheet 2nd sheet ing stack entry
[1] [2] [3] [4]
: Alignment : Escape
F-2-38
Alignment plate
(PI5)
0009-2546