Removing The Paper Folding Roller - Canon Saddle Finisher-T2 Service Manual

F-3-263
3.3.9.13 Removing the Paper
Folding Roller
1) Disconnect two connectors [1] and remove the
harness from two edge saddles [2] and two clamps [3].
[2]
[3]
F-3-264
2) Disconnect two connectors [1] and remove the
harness from five edge saddles [2].
3) Remove three screws [3] and remove the paper
folding/paper pushing motor base [4].
[7]
[1]
0009-4112
[1]
[2]
[1]
[4]
[3]
[2]
F-3-265
4) Remove the screw [1], remove the spring retaining
plate [2], and remove the front tension spring [3] and
the smaller tension spring [4].
[2]
[4]
F-3-266
5) Remove the screw [1], remove the spring retaining
plate [2], and remove the rear tension spring [3] and
the smaller tension spring [4].
Chapter 3
[3]
[2]
[1]
[1]
[3]
3-65