Removing The Escape Door Unit - Canon Saddle Finisher-T2 Service Manual

Chapter 3
F-3-286
3.3.11.5 Removing the Escape
Door Unit
1) Remove two E-rings [1].
2) Remove screw and remove the escape unit support
plate [3].
3) Open the escape door unit [4] and remove the
escape door unit.
[4]
[2]
F-3-287
Do not remove the two screws [1] securing escape
door shaft.
3-70
[2]
[1]
0009-4477
[1]
[3]
[1]
F-3-288