Canon Saddle Finisher-T2 Service Manual page 131

[4]
[3]
[2]
F-3-115
4) Remove four screws [1] and remove the stay [2].
The edge saddle harness of the stay need not be
removed.
F-3-116
5) Disconnect two connectors [1] and remove the
harness [2] from two clamps [3].
6) Remove two screws [4], shift the positioning plate
unit [5] forward once, and then pull it out from the
paper feeding side.
[3]
[2]
[1]
Chapter 3
F-3-117
3-29