E5F0;Paper Positioning Plate Motor Error; E5F1;Paper Folding Motor Error; E5F2;Guide Motor Error - Canon Saddle Finisher-T2 Service Manual

Chapter 4
1) Check the shutter home position sensor. Does the sensor operate normally?
NO : Replace the sensor.
Wiring
2) Is the wiring between the finisher controller PCB and stack ejection motor, and between the finisher controller
PCB and shutter clutch normal?
NO : Repair the wiring.
Shutter mechanism
3) Is there any abnormality in the shutter mechanism?
YES : Repair the shutter mechanism.
Stack ejection motor (M102)/Shutter clutch (CL101)/Stack ejection lower roller clutch (CL102)/Finisher controller
PCB
4) Does it improve when the stack ejection motor, the shutter clutch and the stack ejection lower cluch are replaced?
YES : End
NO : Replace the finisher controller PCB.

4.4.1.13 E5F0;Paper positioning plate motor error

Paper positioning plate home position sensor (PI7)
1) Check the paper positioning plate home position sensor. Is the sensor normal?
NO : Replace sensor.
Positioning plate drive mechanism
2) Is there a problem with the positioning plate drive mechanism?
YES : Repair the positioning plate drive mechanism.
Paper positioning plate motor (M4)/Saddle stitcher controller PCB
3) Is the problem solved by replacing the paper positioning plate motor?
YES : Complete.
NO : Replace saddle stitcher controller PCB.

4.4.1.14 E5F1;Paper folding motor error

Paper folding motor clock sensor (PI4)/Paper folding home position sensor (PI21)
1) Check the paper folding motor clock sensor and paper folding home positionsensor. Are the sensors normal?
NO : Replace sensor.
Paper folding roller drive mechanism
2) Is there a problem with the paper folding roller drive mechanism?
YES : Repair the paper folding roller drive mechanism.
Paper folding motor (M2)/Saddle stitcher controller PCB
3) Is the problem solved by replacing the paper folding motor?
YES : Complete.
NO : Replace saddle stitcher controller PCB.

4.4.1.15 E5F2;Guide motor error

Guide home position sensor (PI13)
4-16
0009-2601
0009-2602
0009-2603