Removing The Saddle Unit - Canon Saddle Finisher-T2 Service Manual

Chapter 3
F-3-93
3.2.3.14 Removing the Saddle
Unit
1) Disconnect two connectors [1] and remove the
harness from three clamps [2].
F-3-94
2) Remove two screws [1].
[1]
F-3-95
3) Remove the screw [1].
3-24
[1]
0009-3764
[1]
[2]
F-3-96
4) Open the saddle door [1] and remove two screws
[2].
F-3-97
5) Remove the saddle unit [1] from the paper feeding
side.
F-3-98
[1]
[2]
[1]
[1]