Swing Unit; Removing The Front Door; Removing The Rear Upper Cover; Removing The Escape Tray Cover - Canon Saddle Finisher-T2 Service Manual

[6].
[6]
[4]
[5] [1]
F-3-38
5) Turn the stapler over, disconnect two connectors
[1], remove two screws [2], and remove the stapler
from the stapler base.
[2]
[1]
F-3-39

3.2.2 Swing Unit

3.2.2.1 Removing the Front
Door
1) Open the front door [1] and remove the clip [2].
2) Lift the front door [1] to remove.
[3]
[2]
0009-4450
[1]
F-3-40
3.2.2.2 Removing the Rear
Upper Cover
1) Remove four screws [1] and remove the rear upper
cover [2].
[2]
[1]
[1]
F-3-41
3.2.2.3 Removing the Escape
Tray Cover
1) Remove four screws [1], open the escape door [2],
and then remove the escape tray cover [3].
Chapter 3
[2]
0009-3662
0009-4415
3-11