E514; E530 - Canon Saddle Finisher-T2 Service Manual

Chapter 5

5.3.4 E514

Code
E514

5.3.5 E530

Code
E530
5-6
T-5-11
Detail Error
Description
8001 Rear end assist
motor(M109)/
Rear end assist
homeposition
8002
sensor (PI109)
T-5-12
Detail Error
Description
8001 Aligning plate
frontmotor
(M103)/
Aligning plate
fronthome
8002
position
sensor(PI106)
Detection timing
The stapler does not leave the rear end
assist home position when the rear end
assist motorhas been driven for 3 seconds.
The stapler does not return to the rear end
assist home position when the rear end
assist motor has been driven for 3 seconds.
Detection timing
The aligning plate does not return to
aligning plate front home position sensor
when the alignment plate front motor has
been driven for 4 seconds.
The aligning plate does not leave the
aligningplate front home position sensor
when thealignment plate front motor has
been driven for 4 seconds.
0009-2679
0009-2681