Canon Saddle Finisher-T2 Service Manual page 224

Chapter 4
No.
[7]
[8]
3. Necessary Tool
The following item needs to be prepared for download.
Computer (PC)
Prerequisite: The download tool (Ver. 3.11E or higher) must be downloaded to the PC.
4. Download Procedures
a. Registering ROM data
1) Store ROM data to be downloaded in the 'C:\ServTool\NewROM' folder.
2) Start up the Service Support Tool.
C:\ProgramFiles\Service Support Tool\bpchost.exe
3) Select [Register System Software].
4) Select the data inside the NewROM folder
4-38
Description Function
Cable B (9 A cable to connect the downloader PCB and the
pins)Length: approx. Finisher
50cm
RS-232C connector A connector to connect an RS-232C cable to the
downloader PCB
F-4-38