Removing The Escape Tray Cover; Removing The Front Inside Upper Cover; Removing The Grate-Shaped Upper Guide; Removing The Tray 1 - Canon Saddle Finisher-T2 Service Manual

Chapter 3
[2]
[1]
[1]
F-3-151
3.3.3.3 Removing the Escape
Tray Cover
1) Remove four screws [1], open the escape door [2],
and then remove the escape tray cover [3].
[3]
[1]
F-3-152
3.3.3.4 Removing the Front
Inside Upper Cover
1) Remove four screws [1], open the escape door [2],
and then remove the front inside upper cover [3].
3-38
3.3.3.5 Removing the Grate-
0009-4427
shaped Upper Guide
1) Lower tray [1] below the grate-shaped upper guide
[2] (For how the tray is moved, see the steps under

"Removing the Tray 1.").

2) Remove five screws [3] and remove the grate-
shaped upper guide [2].
[1]
[2]
0009-3614
3.3.3.6 Removing the Tray 1
When moving the tray down to attach it, you need
to push the tray lift motor gear [1] to the front (using
a screwdriver or the like) to release the clutch.
However, when the clutch is released, the tray [2]
drops by its own weight. Be sure to hold the tray
with your hand when releasing the clutch.
F-3-153
[2]
[3]
[1]
F-3-154
[2]
[3]
[1]
0009-3615
[3]
0009-3595