Setting Of "Synchro-Welding - YASKAWA YRC1000 Instructions Manual

5.1
Operation
1 Select {ARC WELDING} under
the main menu.
2 Select {ARC START COND.}
or {ARC END COND.}.
3 Display {OTHER} tab of the
welding condition file to set
"synchro-welding",
and select "SYNCRO WELD-
ING ON" if the function is
required.
5 Synchro-welding Function [Compatible Welder : MOTOWELD-
X350]
5.1

Setting of "Synchro-welding"

Setting of "Synchro-welding"
Determining "synchro-welding" function is available or not is set to every
arc-start-condition files and arc-end-condition files.
The setting is edited in the window of an arc start condition file or an arc
end condition file.
Note : "SYNCRO WELDING ON" is showed on display only in
using MOTOWELD-X350.
5-2
Comment
HW1484216
HW1484216
54/79