YASKAWA YRC1000 Instructions Manual page 74

For weldcom function: arc welding/digital i/f function
Hide thumbs Also See for YRC1000:
Table of Contents

Advertisement

Alarm
Alarm
Sub
No.
Name
Code
4277
MOTOWELD
790
OUTSIDE OF
CURR.SETTI
NG(H)
4278
MOTOWELD
791
OUTSIDE OF
CURR.SETTI-
NG(L)
4279
MOTOWELD
108
MOMENTARY
OVER-CURR
4280
MOTOWELD
109
OVER-
VOLTAGE
4281
MOTOWELD
704
+15V POWER
SUPPLY
ERROR
4282
MOTOWELD
705
POWER
SUPPLY
ERROR
6
Alarm and Error
6.1
Alarm
Meaning
Sub Code: MOTOWELD's Err Code.
Sub Code: MOTOWELD's Err Code.
Sub Code: MOTOWELD's Err Code.
Sub Code: MOTOWELD's Err Code.
Sub Code: MOTOWELD's Err Code.
Sub Code: MOTOWELD's Err Code.
6-20
Remedy
(1)Check if the selection of motor is
correct, or confirm the settings of C
parameter C09.
(2)Check that the welding wire does
not slip, or the wire is fed as
instructed by the feeding command.
(3)Check that the wire stick out is not
excessively short or long.
(4)Check that the range set in C
parameter C29 is not too narrow.
(5)Check if the wire, shielding, etc.
are correctly set.
(1)Check if the selection of motor is
correct, or confirm the settings of C
parameter C09.
(2)Check that the welding wire does
not slip, or the wire is fed as
instructed by the feeding command.
(3)Check that the wire stick out is not
excessively short or long.
(4)Check that the range set in C
parameter C29 is not too narrow.
(5)Check if the wire, shielding, etc.
are correctly set.
(1)Check that short-circuit or the
earth grounded of the output cable.
(2)May be power circuit broken.
Contact your YASKAWA
representative.
Contact your YASKAWA
representative.
The use of MOTOWELD-RP500:
Replace the switching power supply
unit (Service parts
code:35015612200) or the Main
board (Service parts
code:AJ0RP3024). Or, please
change two of them.
The use of MOTOWELD-RL350:
Replace the Interface board (Service
parts code: UNIT-Pr (IF)-008B) or
the Main board (Service parts code:
UNIT-Pr (MB)-030). Or, please
change two of them.
The use of MOTOWELD-RP500:
Replace the switching power supply
unit (Service parts
code:35015612200) or the Main
board (Service parts
code:AJ0RP3024). Or, please
change two of them.
The use of MOTOWELD-RL350:
Replace the Interface board (Service
parts code: UNIT-Pr (IF)-008B) or
the Main board (Service parts code:
UNIT-Pr (MB)-030). Or, please
change two of them.
HW1484216
HW1484216
74/79

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents