Motoweld Type: Operation Of Maintenance Window - YASKAWA YRC1000 Instructions Manual

3 Operation of Welding Condition File Edit Window
3.6

MOTOWELD Type: Operation of Maintenance Window

3.6 MOTOWELD Type: Operation of Maintenance Window
1. At the top window, select {Maintenance} button.
2. Select {Maintenance}.
(1) "Welder update"
: Update Welder's data.
Select "Data type" and "Device" in which welder's data is put.
Select {Upload starting} and send update data to the welding
power source
(2) {All write(Controller->welder)}: Send the parameters at a time to
the welding power source.
(3) {All read(welder->Controller)}: Receive the parameters at a time
from the welding power source.
(4) "CPU ver.,DSP ver.,DB ver": The versions of software and data-
base in the welding power source are
displayed.
3-7
HW1484216
HW1484216
42/79