3
Operation of Welding Condition File Edit Window
3.8
FroniusTPS Type: Operation of Top Window
3.8
FroniusTPS Type: Operation of Top Window
1. Display {OTHER} tab of the welding condition file to specify the
number of a weld user file to be used.
2. Display {OTHER} tab of the welding condition file, and press
{Welder setting}.
3. Select weld user file.
4. Select {Program No. setting}.
– Set a welding program in weld user file selected.
→Go to the [Program No. setting] window.
5. Select {Param setting}.
– Change the parameter setting of weld user file selected.
→Go to the [Param. setting] window.
3-9
HW1484216
HW1484216
44/79