Motoweld Type: Operation Of Top Window - YASKAWA YRC1000 Instructions Manual

HW1484216
3.3
3 Operation of Welding Condition File Edit Window
3.3

MOTOWELD Type: Operation of Top Window

MOTOWELD Type: Operation of Top Window
1. Display {OTHER} tab of the welding condition file to specify the
number of a weld user file to be used.
2. Display {OTHER} tab of the welding condition file, and press {Welder
setting}.
3. Move the cursor to the weld user file number specified in 1.
– Select weld user file.
4. Select {Weld type}.
– Register a welding type in the weld user file selected.
→Go to Weld type window.
5. Select {Customize}.
– Change the parameter of the weld user file selected.
→Go to Customize window.
6. Select {Maintenance}.
– Perform maintenance. →Go to Maintenance window.
3-2
HW1484216
37/79