Setting Of Optional Function "Motoplus Function" (When Welder Is Froniustpsi) - YASKAWA YRC1000 Instructions Manual

2.5.6 Setting of Optional Function "MotoPlus Function"
(When Welder is FroniusTPSi)
2 Setup
2.5 System Configuration
When the welder is FroniusTPSi, use the MotoPlus function (optional
function). Set the MotoPlus function to enable by following the procedure
below.
1. In the maintenance mode, select {SYSTEM} → {SETUP} → {OPTION
FUNCTION} to display "MotoPlus FUNC.", and then set to "USED".
2. Press [ENTER] to confirm the setting.
A confirmation dialog box appears. Select {YES}.
2-15
HW1484216
HW1484216
26/79