Additional Resources; Document And Software Version; Approvals And Certifications - Danfoss VLT HVAC Drive FC 102 Operating Instructions Manual

Introduction

1.2 Additional Resources

•
®
VLT HVAC Drive FC 102 Design Guide holds all
technical information about the frequency
converter and customer design and applications.
•
®
VLT HVAC Drive FC 102 Programming Guide
provides information on how to programme and
includes complete parameter descriptions.
•
Application Note, Temperature Derating Guide.
•
MCT 10 Set-up Software Operating Instructions
enables the user to configure the frequency
converter from a Windows
environment.
•
®
Danfoss VLT Energy Box software at
www.danfoss.com/BusinessAreas/DrivesSolutions,
then select PC Software Download.
•
®
VLT HVAC Drive BACnet, Operating Instructions.
•
®
VLT HVAC Drive Metasys, Operating Instructions.
•
®
VLT HVAC Drive FLN, Operating Instructions.
Danfoss technical literature is available in print from local
Danfoss Sales Offices, or as electronic copies at:
www.danfoss.com/BusinessAreas/DrivesSolutions/Documen-
tations/Technical+Documentation.htm

1.3 Document and Software Version

This manual is regularly reviewed and updated. All
suggestions for improvement are welcome. Table 1.2 shows
the document version and the corresponding software
version.
Edition Remarks
MG11F5xx Replaces MG11F4xx
Table 1.2 Document and Software Version
MG11F502
Operating Instructions
™
-based PC
Software version
4.1x
Danfoss A/S © 08/2014 All rights reserved.

1.4 Approvals and Certifications

The frequency converter complies with UL508C thermal
memory retention requirements. For more information,
refer to the section Motor Thermal Protection in the
product specific design guide.
NOTICE
Imposed limitations on the output frequency
(due to export control regulations):
From software version 3.92, the output frequency of the
frequency converter is limited to 590 Hz.
1 1
5