Changing Of Data Value, Step By Step; Readout And Programming Of Indexed Parameters; Parameter Menu Structure - Danfoss VLT HVAC Drive FC 102 Operating Instructions Manual

How to Programme
6.1.10 Changing of Data Value, Step by
Step
Certain parameters can be changed step by step or
infinitely variably. This applies to parameter 1-20 Motor
Power [kW], parameter 1-22 Motor Voltage and
parameter 1-23 Motor Frequency.
The parameters are changed both as a group of numeric
data values and as numeric data values infinitely variably.
6.1.11 Readout and Programming of
Indexed Parameters
Parameters are indexed when placed in a rolling stack.
15-30 Alarm Log: Error Code to 15-32 Alarm Log: Time
contain a fault log which can be read out. Select a
parameter, press [OK], and use [
through the value log.
Use parameter 3-10 Preset Reference as another example:
Select the parameter, press [OK], and use [
scroll through the indexed values. To change the
parameter value, select the indexed value and press [OK].
▲
Change the value by [ ] and [
new setting. Press [Cancel] to abort. Press [Back] to leave
the parameter.

6.2 Parameter Menu Structure

MG11F502
Operating Instructions
▲ ▼
] and [ ] to scroll
▲ ▼
] and [ ] to
▼
]. Press [OK] to accept the
Danfoss A/S © 08/2014 All rights reserved.
6 6
101