Controlling The Motor Via The Fieldbus - Siemens Sinamics G120 CU240E Operating Instructions Manual

If you enable one of the digital inputs to be freely used for BICO technology (P701...P709 =
99), then you must interconnect this digital input to the required control command.
If value 99 is assigned to the digital input to define its function, this can only be reversed by
restoring the factory settings.
5.3.3

Controlling the motor via the fieldbus

Control commands via the fieldbus
To control the motor via the fieldbus, the inverter must be connected to a higher-level
controller via a PC tool. For more information, see "Operation in fieldbus systems".
Frequency inverter
Operating Instructions, 08.10. 2008, t.b.d.
Functions
5.3 Command sources
95