Commissioning The Application - Siemens Sinamics G120 CU240E Operating Instructions Manual

Commissioning
4.5 Commissioning with STARTER
4.5.4

Commissioning the application

Description
● You can now commission your application using the "Drive Navigator" screens or by
● Save your settings so that they are protected against power failure (see below).
● Once you have commissioned your application, disconnect the online connection
Figure 4-16 Application communication
Saving data so that it is protected against power failure
● In the project tree, select your SINAMICS project
● Double-click on "Drive Navigator".
● Select "Commissioning" in the working area
● In the dialog box, select "Save data in the drive (RAM to ROM)".
You can now disconnect the online connection with
70
using the functions available in the project tree.
between the PC and converter by clicking on .
"Disconnect from target system"
Operating Instructions, 08.10. 2008, t.b.d.
Frequency inverter