Interfaces, Connectors, Switches, Control Terminals, Leds On The Cu - Siemens Sinamics G120 CU240E Operating Instructions Manual

3.4.1

Interfaces, connectors, switches, control terminals, LEDs on the CU

Overview of the process and user interfaces
The following interfaces are provided on the Control Unit
● Terminals for the input and output signals
● Card slot to upload and download frequency inverter settings
● Connector to communicate with higher-level controls
● DIP switches to configure the speed encoder, the analog inputs and, if required, to set the
● LEDs for diagnostics
It also shows where they are located.
Frequency inverter
Operating Instructions, 08.10. 2008, t.b.d.
PROFIBUS address.
Connection
3.4 Installing the Control Unit
41