Siemens Sinamics G120 CU240E Operating Instructions Manual page 163

Figure 5-19
Set the DIP switch to address 10 (as shown in the following table).
Table 5- 56
DIP switch
The figure specified in this row must be added to
the address.
Example 1: Address = 10 = 2 + 8
Example 2: Address = 88 = 8 + 16 + 64
The valid address range is specified in the table below:
Table 5- 57
DIP switch settings
0
1 ... 125
126, 127
Frequency inverter
Operating Instructions, 08.10. 2008, t.b.d.
PROFIBUS interface, diagnostics, and address setting on the Control Unit
Examples of setting the PROFIBUS address
Valid PROFIBUS addresses
Meaning
PROFIBUS address defined via P0918
Valid PROFIBUS address
Invalid PROFIBUS address
5.11 Operation in fieldbus systems
1 2 3 4
1 2 4 8
Functions
5 6 7
16 32 64
163