Insert drives
Figure 4-9
● In this dialog box, enter a name for your frequency inverter, e.g.
● Click on "Next".
● Close the "Summary" dialog box by choosing "Finish".
4.5.2
Establishing an online connection between the PC and converter (going "online")
Description
With the procedure described above, the project has been created and your frequency
inverter is integrated into the project tree. However, there is no online connection.
● Click on
The left-hand column in the dialog box below contains the online data that has been saved,
while the right-hand column contains the offline data that has been saved.
Frequency inverter
Operating Instructions, 08.10. 2008, t.b.d.
Insert drives
"SINAMICS_G120_CU240S" (no blanks or special characters).
("Connect to the target system"), in order to go online with the frequency
inverter.
Commissioning
4.5 Commissioning with STARTER
63