Controlling The Monitor Sound; Using The Device Without A Computer - Steinberg UR28M Operation Manual

Controlling the Monitor Sound

This section shows how to control the monitor sound
by using the buttons and knobs on the device.
Connection Example
Monitor speakers
Portable audio player
Operation
1.
Play back some music with your DAW
software or music player.
2.
Control the monitor sound by using the
following buttons and knobs.
OUTPUT button A–C
OUTPUT LEVEL knob
MUTE button
MONO MIX button
DIM button
For details on the buttons and knobs, refer to
the "Front Panel" (page 7) in the section "Panel
Control and Terminals (Details)."
The procedures are now complete.
Using the Device Without a
Computer
This section shows how to use the device without a
computer, allowing you to use it as a standalone
mixer or A/D - D/A converter. You can save the DSP
mixer and DSP effect settings configured by the
Monitor speakers
dspMixFx UR28M to the device. These settings are
maintained even if you turn off the power of the
device.
Connection Example
Monitor speakers
Computer
Portable audio player
Procedures
1.
2.
3.
4.
5.
The operation is now complete.
Connect the device to a computer with a
USB cable.
Turn on the device.
Open the dspMixFx UR28M.
For instructions on opening the dspMixFx
UR28M, refer to the "How to Open the Window"
(page 12) in the section "dspMixFx UR28M."
Configure the DSP mixer and DSP effect
settings.
When you make the settings, click [X] on the
upper left of the window to close the
dspMixFx UR28M.
The settings of the dspMixFx UR28M are saved
to the device.
UR28M
Usage Examples
Guitar Microphone
Synthesizer
Operation Manual 30