4
Commissioning
4.7
Remarks on parameters of the CPX system settings
4.7.1
Sequence of start parameterisation during switch-on (system start)
The parameterisation during system start of the CPX terminal is dependent on the setting of the system
start parameter stored in the bus node.
System start with default parameters
– System start with default parameterisation (factory setting) and current CPX expansion
– External parameterisation possible
System start with saved parameters
– System start with saved parameterisation and saved CPX expansion
– Parameters and CPX expansion are saved remanently
– External parameterisation is blocked
– LED "M" on the CPX bus node illuminates
Fig. 4.9
Setting system start parameters (TwinCAT 3.x)
Festo – P.BE-CPX-FB37-EN – 1406NH – English
41