Mean Value Hold - Unipulse F370 Operation Manual

7.HOLD FUNCTIONS

7-5-7. Mean Value Hold

The mean value of the sampling values over the specified period is calculated and
updated to perform comparison operation.
The period is specified by the setting of "all period", "external signal", "time", or "time
with trigger".
t1：A delay time between the instant when the T/H or H/M signal is inputted and the
60
(Example) Externally Specified Period Mean Value Hold
＋
Real-time
values
OFF
H/M
ON
OFF
T/H
ON
OFF
H/E
ON
OFF
Judging Outpu
ON
instant when operation is performed.
1.0mS（MAX.）
The detection period is limited by the maximum mean value detection
time set according to the "mean value sampling count".
For details, see the section on Mean Value Sampling Count page 52.
Hold Period
Detection
t1 t1
Indecided Decide
Hold values
t
t1