Hold Off Print; Parameter Protection - Unipulse F370 Operation Manual

5.SETTING OF FUNCTIONS

5-11. Hold Off Print

At hold-off time, the held value is automatically printed to the UNIPULSE printer
coupled with the F370 through the SI/F.
(The hold is released by the T/H signal off timing when the period setting is all interval
in various hold modes by hold functions, and by the T/H signal of timing when other
periods are set.)
How to set

5-12. Parameter Protection

Parameters are protected from being changed by misoperation.
How to set
36
Calibration
Setting call
→
Calibration
Setting call
→
For the parameters which are protected by parameter protection,
see the section on SETTING ITEM CHART page 113.
Page 3
→
Page 3
→