Unit - Unipulse F370 Operation Manual

4.CALIBRATION

4-11. Unit

Set the unit of the load to be displayed. Selection can be made from the following.
2
None, kg, g, t, N, kN, Nm, N/m , Pa, kPa, MPa, bar
How to set
Calibration
Setting call Page 2
→ →
1）Press the MODE button.
2）Press the CALIBRATION button.
3）Press the PAGE button to select the page and press the UNIT button.
4）Select the unit and determine with the OK button.
Scroll with the and buttons.
.
* A change of unit does not affect the indicated value (calibration value)
27