Ac Power Source Input Terminal Block; Frame Ground (Functional Ground); Optional Slot - Unipulse F370 Operation Manual

1.APPEARANCE DESCRIPTION

1-2-2. AC Power Source Input Terminal Block

Connect the AC power cord. The input voltage is 100V - 240V AC, and the frequency is
50/60Hz.

1-2-3. Frame Ground (Functional ground)

This is a ground terminal block. Be sure to ground the F.G. terminal to prevent electric
shocks and failures due to static electricity.

1-2-4. Optional Slot

Any one of the following optional boards can be mounted.
4
• BCD data output
• RS-232C communication interface
• D/A converter
• RS-485
• CC-Link interface
(CC-Link is an abbreviation for "Control & Communication Link".)
• Device Net interface