Graph Plotting; Continuous - Unipulse F370 Operation Manual

9-2. Graph Plotting

9-2-1. Continuous

Graph plotting is started by turning on the START/STOP key or turning on the ST/SP
external input. When it ends on one screen, the screen is cleared after expiration of the
interval time and graph plotting restarts on the next screen. It is ended by turning off the
START/STOP key or turning off the ST/SP external input.
START/STOP
（Key）
ST/SP
（Outside Input）
＋
Start
Plotting Period
X end point
time setteing
9.WAVEFORM DISPLAY
Screen Clear
Plotting Period
（Screen Hold）
X end point
time setteing
Interval Time
t
69