Start Point; Y (Load) Start Point And Y (Load) End Point - Unipulse F370 Operation Manual

9.WAVEFORM DISPLAY
9-7. X Start Point
Set the time to display by one screen in the range between 0.1 sec. and 99.9 sec.
How to set

9-8. Y (Load) Start Point and Y (Load) End Point

Setting range: -99999 - 99999 (where Y start point < Y end point)
How to set
74
Setting call →
Simple setting call
Press the X button on the graph display to go direct to the X end point entry screen.
Setting call →
Graph
Simple setting call
Press the Y button on the graph display to go direct to the Y end point entry screen.
Page 1
Graph
→
Page 2
→