Calibration Value Selection - Unipulse F370 Operation Manual

4-10. Calibration Value Selection

By storing up to four calibration values in the memory, the desired calibration value can
be called to switch the indicated value. Setting values that can be switched are as
follows:
How to set
Setting call
1）Press the MODE button.
2）Press the CALIBRATION button.
Calibration Mode Setting
Zero Calibration
Actual Load Calibration
Equivalent Input Calibration
Minimum Slope
Unit
Decimal Place
Digital Offset
Calibration
→
Operation Mode Setting
Excitation Voltage
Page 1
→
4.CALIBRATION
25