Graph Function; Interval Time; Graph Start Level - Unipulse F370 Operation Manual

9.WAVEFORM DISPLAY

9-3. Graph Function

Set the graph plotting mode.
Modes
How to set

9-4. Interval Time

If you select "continuous" in the graph function setting, set the graph plotting operation
interrupting time from clearing the screen until moving to the next graph plotting
operation. During this time, the graph screen is held.
How to set

9-5. Graph Start Level

If you select [level] or [external + level] in the graph function setting, set the graph
plotting start level.
How to set
72
Continuous, external, level, external + level
Setting call →
Graph
Setting range: 00.0 - 99.9 sec.
Setting call →
Setting range: -99999 - 99999
Setting call →
Page 1
→
Page 1
Graph →
Page 1
Graph →