Stop Bit; Terminator; Communication Modes - Unipulse F370 Operation Manual

11.RS-232C INTERFACE(OPTION)

11-2-5. Stop Bit

1 bit, 2 bit
How to set

11-2-6. Terminator

CR，CR ＋ LF
How to set

11-3. Communication Modes

1.Communication Mode 0
Communications are carried out by commands from the host computer.
The indicated value, status and parameters can be read, and parameters can be written.
2. Communication Mode 1
The indicated value and status are continuously transmitted.
3. Communication Mode 2
The indicated value is transmitted upon printing.
82
Setting call →
Option
Setting call →
Option
Page 1
→
Page 2
→