Installation; Rack Options; Chapter 5 - Controledge 900 Common Reference Information - Honeywell ControlEdge 900 platform Hardware Planning And Installation Manual

CHAPTER
5
CONTROLEDGE 900 COMMON REFERENCE
INFORMATION
This section is applicable to both UOC and PLC systems and provides
the following information:

Installation

n
Wiring and cabling planning
n
Maintenance
n
Diagnostics and Troubleshooting
n
Special Condition of Use and Approved Standards
n
Installation
The topics covered in this chapter are:
See "Rack options" below for more information.
n
See "Rack Types" on page 55 for more information.
n
See "Rack installation" on page 64 for more information.
n
See "Power Supply" on page 77 for more information.
n
See "Environmental considerations" on page 81 for more
n
information.
See "ControlEdge 900 I/O " on page 87 for more information.
n
See "Terminal block styles" on page 100 for more information.
n
See "Terminal Block-to-Field (Signal) Wiring" on page 106 for
n
more information.

Rack options

I/O racks are available in 4-slot, 8-slot, and 12-slot versions and can
be utilized to house either a controller and I/O or as an I/O expansion
rack containing EPM and I/O.
Both 8-slot I/O rack and 12-slot I/O rack have two types of racks:
53