Chapter 1 - About This Guide - Honeywell ControlEdge 900 platform Hardware Planning And Installation Manual

CHAPTER
1
ABOUT THIS GUIDE
Scope
This guide describes how to set up the ControlEdge 900 platform and
install UOC or PLC.
Revision history
Revision Date
A September
2016
B November
2016
C April 2017
D June 2017
E September
2017
F November
Description
Initial release of document
Update for PLC R130.2 Release including:
Delete the Self-powered 3–wire transmitter for UIO AI,
l
and updated Self-powered 4-wire transmitter for UIO AI.
Add 900RTP-H1xx RTP Cable
l
Add MOXA Unmanaged Ethernet Switch EDS-308 and
l
EDS-316-MM-SC.
Update for the PLC R140 Release including:
Five new I/O modules
l
Add new RTP and RTP Cables
l
New Terminal Blocks
l
New accessory parts
l
Update for PLC. Adding the following items:
Add UIO wiring limitation and hardware version
l
comparison
Add RTP dimension for installing
l
Added UOC information (for Experion R505 release)
Update for UOC network topologies
7