Overview Of Rtps; Module And Rtp Matching Table - Honeywell ControlEdge 900 platform Hardware Planning And Installation Manual

Appendix A - Installing RTP

Overview of RTPs

The Remote Termination Panel (RTP) provides an easy way to connect the
ControlEdge 900 controller to the field wiring. The RTP integrates some of the
typical externally connected components, reducing wiring and setup time. It also
minimizes the need for multiple wires under a single screw connection by
expanding the connectivity of the shared terminals of the I/O modules.
There are three RTP types:
n
n
n
The relationship of modules, terminal blocks and their RTP components are listed
below:
Table A-1: Module and RTP Matching Table
I/O Module
UIO (900U01-
0100)
UAI (900A01-
0202)
DI24 (900G32-
0101)
DI110/220
(900G03-0202)
DO24(900H32-
0102)
DO110/220
(900H03-0202)
DO 8 CH
(900H01-0202)
HLAI 16 CH
(900A16-0103)
186
900RTA-L001 for UAI
900RTS-0001 for UIO, AI, AO, DI and DO
900RTR-H001 for Relay Output
Terminal Terminal
Block Block
(Euro) (Barrier)
900TEK- 900TBK-
0200 0200
900TEK- 900TBK-
0200 0200
900TCK- N/A
0200
900TER- 900TBR-
0200 0200
900TCK- N/A
0200
900TER- 900TBR-
0200 0200
900TER- 900TBR-
0200 0200
900TCK- N/A
0200
RTP
RTP
Cable
900RTS- 900RTC-
0001 H2xx
900RTA- 900RTC-
L001 L2xx
900RTS- 900RTC-
0001 34xx
900RTS- 900RTC-
0001 H2xx
900RTS- 900RTC-
0001 34xx
900RTS- 900RTC-
0001 H2xx
900RTR- 900RTC-
H001 H2xx
900RTS- 900RTC-
0001 34xx
RTP required per module
(only for RTP not for Cable)
1
1
2
1
2
1
1
2