Uio_Do Channel Configuration; Uio Pins Branch For Interconnecting The Do - Honeywell ControlEdge 900 platform Hardware Planning And Installation Manual

Table 5-19: UIO pins branch for interconnecting the DO
Pins
Two pins branch
Three pins branch
Four pins branch
120
See the following figure for the channel configuration.
Figure 5-29: UIO_DO channel configuration
The UIO-DO channel supports ganging.
A set of two, three, or four DO channels can be configured to deliver
up to 1 Ampere, 1.5 Amperes, or 2 Amperes current respectively to the
field.
A two-pin branch with a pitch of 0.2 inches (5.08 mm) can be used for
interconnecting two DO channels. The following table lists the pins
branch for interconnecting the DO channels.
No. of DO channels Two pins
2
3
4