Reference About Installing Racks, Epm, Power Supply And So On - Honeywell ControlEdge 900 platform Hardware Planning And Installation Manual

Component
Item
Name
Switch or
Router/Firewall
8 Ethernet CAT5
shielded cable
Fiber Optics
Cable
9 Communications
cable
Following sections provide information about installing racks, EPM,
power supply and so on.
Table 3-3: Reference about installing racks, EPM, power supply and so on
Components Reference section
Racks For information about options and types of racks, see the sections
Rack Options
Racks, see the section
EPM For information about installing EPM, see the section
Processor
Power Supply For information about connecting to AC or DC power supply, see
the section
Configuration For information about configuration, refer to the Software
Configuration Guide.
Environmental For information about environmental consideration to be taken
care, see the section
Description
100Base-T Ethernet devices in an Ethernet
network. Devices include other
ControlEdge 900 Controller, HMIs, and
includes routers, servers, and other devices
in wider networks. Use of a properly
configured firewall provides a more robust
network limiting exposure to uncontrolled
network traffic.
Connects I/O expansion racks to CPMs
and/or to 100Base-T Ethernet switches.
The maximum length of the Ethernet cable
is 100m.
The maximum length of multi-mode fiber
optic cable depends on the specification of
network device, typically 5 Km with a MOXA
EDS-308-MM-SC. A qualified Fiber Optic
Convertor is required.
Ethernet able or Fiber Optic Cable
connects devices icn Ethernet Open
Connectivity network to SCADA
applications.
and Rack Types. For information about installing
Rack
Module.
Power Supply.
Environmental
Installation.
Considerations.
Source
Third-party
suppliers
Third-party
suppliers
Expansion
21