Honeywell ControlEdge 900 platform Hardware Planning And Installation Manual page 183

Title
Electromagnetic compatibility (EMC) – Part 3-2: Limits –
Limits for harmonic current emissions (equipment input
current ≤ 16A per phase)
Electromagnetic compatibility (EMC) – Part 3-3: Limits –
Limitation of voltage changes, voltage fluctuations and
flicker in public low-voltage supply systems, for
equipment with rated current ≤ 16 A per phase and not
subject to conditional connection
Electromagnetic compatibility (EMC) – Part 4-2: Testing
and measurement techniques – Electrostatic discharge
immunity test
Electromagnetic compatibility (EMC) – Part 4-3: Testing
and measurement techniques – Radiated, radio-
frequency, electromagnetic field immunity test
Electromagnetic compatibility (EMC) – Part 4-4: Testing
and measurement techniques – Electrical fast
transient/burst immunity test
Electromagnetic compatibility (EMC) – Part 4-5: Testing
and measurement techniques – Surge immunity test
Electromagnetic compatibility (EMC) – Part 4-6: Testing
and measurement techniques – Immunity to conducted
disturbances, induced by radio-frequency fields
Electromagnetic compatibility (EMC) – Part 4-8: Testing
and measurement techniques – Power frequency
magnetic field immunity test
Electromagnetic compatibility (EMC) – Part 4-11: Testing
and measurement techniques – Voltage dips, short
interruptions and voltage variations immunity tests
Chapter 9 - Special Condition of Use and Approved Standards
Number
IEC 61000-3-2
IEC 61000-3-3
IEC 61000-4-2
IEC 61000-4-3:
2006+A1:2007+A2
IEC 61000-4-4:
2004+A1
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
Issue
Date
2014
2013
2008
2010
2012
2014
2013
2009
2004
183