Led Indications On Plc-Cpm - Honeywell ControlEdge 900 platform Hardware Planning And Installation Manual

Table 3-5: LED Indications on PLC-CPM
Item LED
1 Status
2 Role
3, 5, Ethernet Port
7, 9 Speed ( Upper
LED)
26
LED
Description
State/Color
OFF No Power is applied to CPM.
On/Green The controller is working normally.
On/Red The controller is stopped.
On/Orange The controller is in power-up process.
Blinking Red The controller is running with error.
@ 1HZ
Blinking Red The controller is accessible via online
@ 0.5HZ communication, but no application is
loaded.
Blinking Red IP address is in conflict.
@ 5HZ
Blink @ 1HZ / The controller is upgrading firmware.
Green &
Orange
OFF It is a non-redundant system or;
On/Green The controller is in primary role and the
system is synchronized, or;
On/Orange The controller is in secondary role and
the system is synchronized.
Blinking The controller is in primary role and the
Green @ 1HZ system is synchronizing.
Blinking The controller is in secondary role and
Orange @ the system is synchronizing.
1HZ
Blinking The controller is in primary role and the
Green @ system is unsynchronized.
0.5HZ
Blink Red @ The controller is in secondary role and
0.5HZ the system is unsynchronized.
Yellow On/Off OFF for 10Base-T; ON for 100Base-TX.