Phase Adjustment Of Paddle Unit - Canon Staple Finisher-AA1 Service Manual

■ Procedure of Adjustment
1. Align the swing unit lifting arm (front and rear) to the gear phase, and fix them in place.
Swing Guide Unit
Up/Down Arm (Rear)

Phase adjustment of paddle unit

If you remove or replace the swing unit, perform phase adjustment of paddle unit.
■ Checking Phase Angle of Paddle Unit
1. Make a print to have a sheet of paper ejected on the stack tray and the paddle unit will stop at its home position.
2. Lower the stack tray.
Gear
174
Gear
Swing Guide Unit
Up/Down Arm (Front)
5. Adjustment